- Valves[10]
- Welding Wires[1]
- Welding Rods[2]
- Other Metals & Metal Products[6]
- Cast & Forged[10]
- Pipe Fittings[1]
- Nickel[5]
- Springs[4]
- Valve Balls[6]
- Flanges[6]
- Valve Stems[3]
- Other Valve Parts[1]
- Pigment[1]
- Adhesive Tape[1]
- Safety Helmet[1]
- Other Plastic Building Materials[2]
- Contact Person : Ms. liu kara
- Company Name : Shanghai Hongwon Special Alloy Material Co., Ltd.
- Tel : 86-21-59581353
- Fax : 86-21-59581353
- Address : Shanghai,jiading,36# No.5196 Huyi Highway
- Country/Region : China
- Zip : 201806
Monel K500 flange
DescriptionMonel nickel-copper alloy K-500 combines the excellent corrosion resistance characteristic of Monel alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanimum to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated thoughout the matrix. The thermal processing used to effect precipitation is commonly called age hardening or aging.
ApplicationTypical applications for alloy K-500 are pump shafts and impellers; doctor blades and scrapers; oil-well drill collars and instruments; electronic components; springs; and valve trim.
Corrosion ResistanceThe corrosion resistance of Monel alloy K-500 is subtantially equivalent to that of alloy 400 except that, when in the age-hardened condition, alloy K-500 has a greater tendency toward stress-corrosion cracking in some environments. Monel alloy K-500 has been found to be resistant to a sour-gas environment. After 6 days of continuous immersion in saturated (3500ppm) hydrogen sulfide solutions at acidic and basic pH's (ranging from 1.0 to 11.0), U-bend specimens of age-hardened sheet show no cracking. There was some tightly adherent black scale. Hardness of the specimens ranged from 28 to 40 Rc.The combination of very low corrosion rates in high-velocity sea water and high strength make alloy K-500 particularly suitable for shafts of centrifugal pumps in marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting, but this pitting slows down after a fairly rapid initial attack.
--------------------------------------------------------------------------------
Physical PropertiesDensity, lb/cu in.......................................................................... 0.3054 gram/cc............................................................................ 8.434Melting Range, °F............................................................... 2400-2460Modulus of Elasticity, 10(6) psi, Tension..................................... 26.0 Torsion....................................... 9.5Poisson's Ration............................................................................ 0.32
Monel K500 flange
